Remote – EV675 Multi-Surface Robotic Vacuum
Remote for the BISSELLEV675 Multi-Surface Robotic Vacuum, Series 2503.
NOTE: Be sure to install batteries in the remote.
To Pair the Remote to the Robot follow these instructions:
While the Power Switch is on the side of the robot is OFF, OFF (O), press and hold the play button on the remote for 5 seconds until the clock icon on the display flashes.
Continue to hold the play button and turn the robot ON (I). NOTE: The robot will beep three times to indicate that it has successfully paired
To Set the Clock follow these instructions:
Set the time by pressing the clock button on the Remote Control and holding until the icon flashes on the Remote Control display
Use the directional arrows to set the hour and minute
Press the clock button again to save the time setting. NOTE: The robot will beep once to confirm the time has been saved.
To Schedule Cleaning Sessions:
NOTE: Be sure the clock is set to the correct time before scheduling cleaning sessions.
Press the schedule button on the Remote Control. The icon will begin to flash on the Remote Control display.
Use the directional arrows to set the hour and minute for your robot to start cleaning.
Press the schedule button again to save the schedule setting. NOTE: The robot will beep once to confirm the schedule has been saved.
To cancel a scheduled cleaning session, press and hold the schedule button on the remote.